Maintenance Online -

	03/03/2016 Big MIGs a Hit at Inverter Fusion Ltd UK welding equipment manufacturer, Inverter Fusion Ltd, has introduced two new machines to their i-TECH range of welding machines. More...
	03/03/2016 Chemical Cleaning Pump When a food processing plant in North Yorkshire found that oil coolers were running too hot, and heat exchangers used for pasteurising food were struggling to keep up, the cause was quickly identified as being scale and corrosion debris in the water side of several plate heat exchangers. More...
	03/03/2016 The Story of the Forgetful Driver I was talking to a couple of engineers from a well-known UK Dairy company. I say talking but the reality was that they had come to look at some equipment and whilst passing, our display had caught their eye and they had paused for a millisecond. More...
	03/03/2016 Engineering at the University of Central Lancashire Engineering at the University of Central Lancashire (UCLan) has received a major investment to launch a Ł30m Engineering Innovation Centre (EIC) with state of the art facilities for design, manufacture and research. More...
	03/03/2016 Maintenance and Condition Monitoring Solutions PCMS Engineering are leaders in intelligent maintenance and condition monitoring solutions, and work across a variety of industries More...
	02/03/2016 Safe Vibration Data Collection in Hazardous Environments Emerson Process Management’s CSI 2140 Machinery Health Analyzer has received ATEX/IECEx, Zone 2 certification, enabling the latest generation portable vibration analyser to be used in a wide range of hazardous environments. More...
	01/03/2016 Immediate, Quantifiable Bottom Line Savings For Your Business Idhammar’s integrated Overall Equipment Effectiveness (OEE) Software and Computerised Maintenance Management Systems (CMMS) are helping our customers achieve operational excellence through improved uptime, better productivity, greater return on assets, and less waste More...
	01/03/2016 Greater Asset Reliability and Enhanced Efficiency GE’s Bently Nevada product line’s suite of groundbreaking rack-based and distributed condition monitoring software and hardware solutions enables greater asset reliability and enhanced efficiency for your operations More...
	01/03/2016 UK Company Predicts High Voltage Failures EA Technology are global leaders in Partial Discharge (PD) monitoring systems. Continual innovation has led to the development of the UltraTEV Monitor and CableData Collector More...
	01/03/2016 New Green LED Safety Shower Stainless Steel Luminaire Dialight’s new stainless LED system uses green, long-life LEDs backed by a 5-year, full-performance warranty for exceptional reliability, improved safety and a dramatic reduction in maintenance costs and demands. More...
	01/03/2016 ESAB Consumables Specified for the Queensferry Crossing ESAB, a world leader in welding and cutting technologies, has been awarded the contract to supply welding consumables for constructing the Queensferry Crossing, which is a new road bridge to take most of the traffic from the existing road bridge over the Firth of Forth connecting Edinburgh with Fife. More...
	01/03/2016 Industrial Interface @ Plant & Asset Management Exhibition Industrial Interface will be exhibiting their range of Remote Asset Monitoring equipment including Wireless Sensors for temperature, pressure, strain gauge, tilt, vibration and virtually any process parameter. More...
	01/03/2016 Fluke Ti450 Infrared Camera with MultiSharp Focus Fluke has introduced the Ti450 Infrared Camera, a new high-end model in its Professional Series, which takes focusing to a higher plane with MultiSharp Focus. More...
	01/03/2016 Next Generation Spirit Levels Now available in the UK with a new modern design, better-focus vials for easier reading and end protectors with an anti-slip function. More...
	01/03/2016 Brammer Announces New Partnership Brammer UK, the UK’s leading distributor of industrial maintenance, repair and overhaul (MRO) products and services, is delighted to announce a new partnership with CEJN UK, a leading global quick connect specialist, which is dedicated to reducing energy consumption and boosting productivity across the automotive, aerospace and transportation sectors. More...
	01/03/2016 Clean Bill of Health for William Hughes Since William Hughes, a specialist manufacturer of springs and wire components, acquired AC Services in the summer of 2015, the company has been busy establishing a high specification clean room at its Stalbridge, Dorset headquarters. More...
	01/03/2016 Infrared Camera at a Reduced Price Until 30th June 2016 and while stocks last, Fluke is offering TiS45 Infrared Cameras at a special offer price, plus a free Apple® iPad mini. More...
	01/03/2016 Lipp Quality Approved for UK Utility Sector Supply Lipp has recently been validated by the Achilles Utility Sector supply-chain management system for UK supply. Lipp is one of the leading tank system manufacturers in Europe, having been in existence since the 1950’s. More...
	01/03/2016 David Winn OBE Joins Winn & Coales ‘Hall of Fame’ To recognise 50 years of service to his company, David Winn OBE, Chairman of the global specialist Denso anti-corrosion products manufacturer, Winn & Coales International, was presented with a recently completed portrait at the company’s Christmas annual Dinner Dance in December 2015. More...
	01/03/2016 HBM Increases Efficiency and Reduces Downtime As test and measurement equipment becomes increasingly popular in production systems and test benches within the industry, the TIM-PN PROFINET interface module from HBM - market leader in the field of test and measurement - has a solution. More...
	01/03/2016 Cleanroom Contract for Hart Working with Kramer Cold Clad, the Tewkesbury-based full project design and build service specialist involved with insulated construction projects, Hart Door Systems has supplied three Speedor Cleanroom doors for a Derby contract which required high-speed doors in an exceptional clean room environment. More...
	01/03/2016 Stainless Steel Interlock Switches Fortress Interlocks has launched a new range of rugged stainless steel interlock switches for high purity applications such as food, beverage, pharmaceutical and chemical processing. More...
	01/03/2016 Combatting Occupational Skin Issues Deb has launched its new Deb Stoko® range – the broadest range of products designed specifically for occupational skin care across a variety of industrial environments. More...
	01/03/2016 Multiple Control Options for Hydra-Cell Metering Pumps The Hydra-Cell Metering and Dosing solutions range from Wanner International includes variants with integrated variable speed drives. The innovative design combines an AC induction motor with a Variable Frequency Drive (VFD inverter) mounted on the motor. More...
	01/03/2016 Fluke ScopeMeter® 120B Series Today’s industrial machinery is more reliable and efficient, but can also be more difficult to troubleshoot because of the complexities of its advanced systems. The new Fluke ScopeMeter 120B Series Industrial Handheld Oscilloscope is designed to address these challenges with innovative features that improve the speed, efficiency, and accuracy of troubleshooting complex electro-mechanical systems. More...
	01/03/2016 New Series of Short Information Videos Choosing the correct equipment can often be daunting, so with this in mind, Martindale Electric - one of the most trusted brands in electrical safety testing - has created a ten-part series of short videos detailing the benefits of choosing the correct equipment for the job. More...
	01/03/2016 Latest Leakage Clamp Meter Now available from Martindale Electric - pioneers in electrical safety - is the new CM69 TRMS AC Leakage Clamp Meter, ideal for troubleshooting leakage currents where other clamps can't, for example, for tracking down the causes of nuisance RCD tripping. More...
	01/03/2016 Top Quality Knee Protection If you work a lot on your knees, Snickers’ range of revolutionary Kneepads will deliver cutting edge protection. More...
	25/02/2016 Ecotile Help Paxton Take Access Control To The Next Level Paxton are one of the European market leaders in electronic access control. When they needed an ESD floor at their manufacturing facility in Eastbourne they naturally chose Ecotile interlocking floor tiles. More...
	25/02/2016 FasTest's Pioneering Range Tom Parker Ltd is pleased to announce that they have secured an exclusive UK distributorship with US company, FasTest, further strengthening their already impressive portfolio. More...
	25/02/2016 Bridgewood’s H&S Precautions Increased The company has been trying to find a safe and simple method to remove unwanted material from both product and employee’s clothing for years, but have consistently experienced issues with compressed air solutions. More...
	25/02/2016 Weldability Sif To Exhibit at MACH 2016 This will be the third visit to the MACH Exhibition for Weldability Sif after successfully exhibiting in 2012 and 2014. For 2016 Weldability Sif has gone all out to be even bigger and better with a larger stand and brand new product lines. More...
	18/02/2016 Safety as Standard With more than 40 years’ experience, Tom Parker Ltd is renowned throughout the fluid power industry as a leading distributor of pneumatic and hydraulic products. With offices in Preston and Basingstoke, the company are perfectly equipped to serve the fluid power requirements throughout the whole of the UK. More...
	18/02/2016 Steel Processing Plant Bearings Replaced NSK has successfully replaced one-piece spherical roller bearings with specially-manufactured split bearings in the converter of a European stainless steel plant. Demonstrating utmost precision and care, this challenging service task was completed in just three days. More...
	15/02/2016 Rotork Control Valve Actuation Following extensive testing, leading glass container manufacturers are specifying the Rotork CMA electric actuator for a critical valve control function in the glass making process. More...
	08/02/2016 Network Rail Apprentices Help The South East’s Railway Run Network Rail’s award-winning apprenticeship scheme is looking for engineers and technicians of the future to join our teams working night and day to keep trains running on one of the world’s fastest-growing railways. More...
	08/02/2016 Centre Stage at Industrial Show As one of Europe’s leading manufacturers of industrial lubricants and one of just a handful with manufacturing facilities in the UK, Morris Lubricants looks back on what has been a hugely successful year in business and shares details of its exciting plans for the year ahead. More...
	08/02/2016 Atlas Copco to acquire Oerlikon Leybold Vacuum Atlas Copco, a leading provider of sustainable productivity solutions, has agreed to acquire the vacuum business of OC Oerlikon Corporation AG More...
	08/02/2016 Italian Compressor Manufacturer Acquisition Atlas Copco, a leading provider of sustainable productivity solutions, has agreed to acquire FIAC, an Italian manufacturer of piston compressors and related equipment with a global sales network. More...
	05/02/2016 Tom Parker Ltd Catalogue Out Now Tom Parker Ltd, the Pneumatic and Hydraulic specialists, are pleased to announce the launch of their biennial 2016-2017 product catalogue, containing 1232 pages of carefully selected products, producing what they believe to be their most comprehensive fluid power focused catalogue to date. More...
	25/01/2016 eMaint Unveils Redesigned Website eMaint Enterprises, a global leader in Computerized Maintenance Management Software (CMMS) is excited to announce the launch of the eMaint.com website to better serve clients and members of the maintenance community. More...
	25/01/2016 New Gas Heater Andrews Heat for Hire are delighted to officially unveil their latest high capacity indirect-fired gas heater – the IG65DV. The product has been designed to suit a broad range of applications and offers end users an economical heating source More...
	25/01/2016 Mighty Impact Wrenches Makita high performance impact wrenches have set the standard of torque performance for the steel erection industry, heavy engineering, plant maintenance and for the pit-stop teams in the World Touring Car Championship and all-electric Formula E World Championship. Now two new models of these powerful but lightweight cordless tools can deliver breathtaking levels of torque. More...
	19/01/2016 ‘Trail by Fire’ Volcano Research Project Crowcon - a leading manufacturer of portable and fixed gas-detection equipment – is sponsoring the Trail by Fire scientific expedition to the volcanoes of the South American Andes with the loan of Gas-Pro portable gas detectors. More...
	15/01/2016 Classic Car Restoration For the first time ever in the UK a nut and bolt restoration of a classic car is to be undertaken by apprentices who are serving their time at a Shropshire company. MP for Ludlow and Minister of State for Defence Procurement Philip Dunne has unveiled the first car ever to be fully restored by apprentices in the UK. More...
	15/01/2016 Achieving Zero Leakage When It Matters Most In high end, sensitive ventilation systems within nuclear, biotechnology, pharmaceutical, research and hospital facilities it is usually vital that the plant is kept running, often 24 hours a day, 7 days a week. In these instances one of the hardest things to accomplish is isolating part of the system completely and efficiently for vital maintenance or other necessary processes. More...
	12/01/2016 King's Hire Boilers Join The Navy When facilities management specialists Interserve Defence needed temporary boilerplant for their major CHP project at HMS Drake in Plymouth dockyard, they contacted the UK’s leading experts, King’s Boiler Hire Ltd. More...
	08/01/2016 Successful Infrared Thermography - What Not To Do! Some suggest it can take years to become an expert in infrared (IR) imaging. However, to get there a bit quicker, FLIR has identified 10 critical (and common) thermography pitfalls that are well worth avoiding in order to ensure the capture of successful thermograms. More...
	07/01/2016 To Repair or Replace - How To Best Serve Your Servo Motor The servo motor has an air of mystique around it. As a result, there are maintenance engineers who choose not to repair such equipment themselves: then there are others who do, often with disappointing results More...
	07/01/2016 Industrial Automation Trends for 2016 In 15 short years, rapid advancements in technology have changed the way we live. With each passing month, we are introduced to new, innovative ways to play, eat, shop and communicate. More...
	04/01/2016 Handling Dounreay With Care It takes dedication and planning to handle some of the world’s most difficult tasks. They are not always the most spectacular or the largest, but it many cases they are deemed to be worthy of going a little more than the extra mile. Mention the words “nuclear industry” and many people are concerned. Yet the decommissioning of nuclear establishments in the UK has created a whole industry to deal with this delicate issue. More...
	22/12/2015 EA Technology’s 5-9s™ Service Savings In November 2014, EA Technology, working in conjunction with a UK Distribution Network Operator (DNO) installed an UltraTEV Monitor with prototype software at one of their high risk substation sites. More...
	22/12/2015 CableData Collector Electricity North West share their experience and results from testing 191 33kV cables with the CableData Collector More...
	04/12/2015 Nederman is Stand-Alone Benchmark for Filtration At-source capture of dust and fume should always be the primary control mechanism for protection of a workforce and to ensure a clean working environment, but despite best intentions at-source capture is not always possible or sufficient. That is why Nederman has introduced its impressive new MCP-16RC Air Purification Tower. More...
	27/11/2015 Leading Engineer now a UCAS Trustee University of Huddersfield Vice-Chancellor Professor Bob Cryan is one of just 12 trustees chosen for their expertise to govern the body that provides the UK university application process More...
	27/11/2015 Jewellery Manufacturing Site Revived Riley Surface World has recently concluded a major project to dispose of and decommission a large electroplating facility in the south west of Ireland. Austrian-owned Hans Andersen was synonymous with quality costume jewellery. It had some of Europe’s most modern product finishing facilities and annually produced around 3.5 million pieces of jewellery. More...
	23/11/2015 New Double Girder Crane Following the launch of the innovative Demag V-type single girder crane, Terex Material Handling has extended the range to include V-type double girder overhead travelling models. V-type double girder cranes are available with load capacities of up to 50 tonnes and are offered with spans of up to 35 m as standard, with longer girder lengths available upon request More...
	20/11/2015 End of Year Offers The FLIR E60 thermal imaging camera gives busy electricians, plant maintenance engineers or facilities technicians a powerful, flexible and feature-rich infrared inspection tool. More...
	20/11/2015 Shrewsbury Firm Achieves ISO 17025 A Shrewsbury-based company has become the first lubricants blender in the UK to achieve a globally recognised accreditation for its laboratory. Morris Lubricants has received ISO 17025 accreditation, which is the single most important international standard for calibration and testing laboratories. More...
	10/11/2015 Leaking Oil Tank Repair A UK oil supplier was faced with a major dilemma when a transformer oil storage tank began to leak in several places. As the tank was located in a confined space, it would be highly dangerous to repair the damage in-situ using hot work. If the tank was removed and repaired offsite, not only would this incur large amounts of downtime, but the cost of welding alone would be over Ł15,000. More...
	09/11/2015 Small Pumps Make a BIG Difference “When we took the first look at the Landia Pumps, our first response was to laugh,” said Joe Freyer, Maintenance Supervisor at the Fourche Creek Wastewater Treatment Facility (FCTF) in Little Rock, Arkansas. The pumps were small and did not resemble the big cast iron units they were used to. More...
	09/11/2015 On The Right Track GE and Deutsche Bahn Energie GmbH announce they are partnering to optimize Deutsche Bahn’s rail network’s power supply. Working with DB Energie, GE Energy Management will bring the technology and expertise that will couple energy fed from utility grid to the rail grid ensuring a more efficient and constant power supply. More...
	06/11/2015 Compact Welding Systems For Use On The Go Fronius has expanded its tried and tested TPS/i series to include the TPS 270i C PULSE and TPS 320i C PULSE power sources with an integrated wirefeeder. The new entrants, designed for welding currents of up to 270 A and 320 A respectively, combine the outstanding features of the TPS/i platform in an extremely compact housing, and are equally suited to MIG/MAG, TIG DC and MMA welding. More...
	05/11/2015 Nederman 'Clears the Air' for UK's Leading Tube Manufacturer Processing over 30 tonnes of tube each week, Iracroft Limited is the UKs leading tube manipulation company, achieving its prominent market position through a program of continuous investment and diversification. More...
	03/11/2015 Nederman Brightens Up Dark Evenings With LED Filterbox Offer With the clocks going back and the dark winter evenings drawing in, Nederman is brightening up the industry with its new Autumn promotion campaign. The market leading manufacturer of air filtration systems is now offering free LED lighting units with any purchase of the Nederman Filterbox 10M. More...
	01/11/2015 KitKat and National Centre of Excellence for Food Engineering KitKat bars may be one of the nation's favourite snacks but the manufacturer of the chocolate treat is about to break with its traditional production processes as part of a series of new research projects led by Sheffield Hallam University. More...
	30/10/2015 Specialist Welding Equipment Helps Business Drive Forward A leading aluminium body builder for commercial vehicles has improved efficiency and saved energy with the installation of new specialist welding equipment throughout its entire 3,000 sq ft factory. More...
	30/10/2015 Does Your Process Plant Let You Down? If keeping processes running efficiently is your responsibility or you are involved in the modification of bulk materials handling plant – then you might be interested in attending one of our short courses More...
	22/10/2015 New Wet Scrubbers A new line of Handte Vortex wet scrubbers from Camfil Air Pollution Control (APC) delivers the combined benefits of high-performance wet dust collection with easy "plug and play" operation and low maintenance. More...
	22/10/2015 Veolia’s RecoBLUE Water Recovery Shortlisted for Award Veolia Water Technologies has been shortlisted for a prestigious Building Better Healthcare Award. More...
	16/10/2015 New, Improved Safety Sign Printers The new BBP35 Multicolour Sign & Label Printer and BBP37 Multicolour and Cut Sign & Label Printer support safety and operations professionals to quickly create a safer, more productive facility with multi-colour and multi-shape signs and labels. More...
	15/10/2015 Gardner Denver Enhances Manufacturing Capabilities Vacuum pump and compressor manufacturer, Gardner Denver, is investing over Ł7 million in a new centre of excellence at its Simmern production site in Germany, home to the CompAir range of compressors. More...
	15/10/2015 Scott Safety Defining What's Next With the mission to define ‘what’s next in safety?’, Scott Safety is back at the A+A trade fair in Dusseldorf More...
	15/10/2015 Axair Guide to Understanding ATEX Regulations Trying to understand the existing ATEX regulations can be a challenging process for many, so the arrival of an update to the legislation may not exactly be met with open arms. More...
	15/10/2015 DuPont Turns Up The Heat at A+A DuPont Personal Protection's presence at this year's A+A from 27 to 30 October in Düsseldorf (Hall 5, Stand A40) will be under the slogan ‘Turning up the heat!‘ More...
	09/10/2015 eMaint Expands Executive Leadership Team eMaint Enterprises, the leader in Computerized Maintenance Management software, is pleased to announce the addition of three new members to the eMaint Leadership team: Jennifer Einhorn, Chief Customer Officer (CCO), Dan Cooper, Chief Revenue Officer (CRO), and Donna Milito, Inside Sales Manager More...
	06/10/2015 Manchester Victoria Opened After Ł44M Upgrade A train station once labelled Britain’s worst was formally reopened today (Tues 6 Oct) following a Ł44 million facelift. More...
	24/09/2015 Switchbox for High Temperature Applications Soldo Controls, the specialist manufacturer of position feedback devices in the Rotork Instruments Division, has introduced a high temperature extension to its LSB range of compact limit switchboxes for valves and dampers. More...
	15/09/2015 Night Vision The first ballast and rails arrived this weekend so the government-sponsored Thameslink Programme can begin laying track across Borough Viaduct, in central London. More...
	15/09/2015 Konecranes Launch Industry-First Rental Solution Having successfully launched its YourKonecranes fully integrated customer interface and asset management platform recently, the world’s leading lifting equipment manufacturer has announced another pioneering initiative – Konecranes RENTALL solutions. More...
	15/09/2015 eMaint Approved for Additional SMRP Continuing Education Course Hours eMaint Enterprises, the leader in Computerized Maintenance Management software, is pleased to announce that its Boot Camp training sessions are now approved for a total of 74 Continuing Education hours by the Society for Maintenance & Reliability Professionals (SMRP) More...
	15/09/2015 Blum Makes Measurement Childs play for Playmobil To achieve maximum efficiency in its automated operation, Playmobil's numerous machining centres use LaserControl measuring systems from Blum-Novotest. More...
	27/08/2015 Critical Protection Condition monitoring specialists SENSONICS have delivered the first tranche of machinery protection systems to the Barakah Nuclear Power Plant project in the UAE (United Arab Emirates). More...
	27/08/2015 Cool Solution Delivers Red-Hot Results Alongside its renowned ranges of traditional industrial cleaning machines such as parts washers, vacuum cleaners, hot water pressure washers and stationary high-pressure cleaners, Kärcher has developed highly innovative blast cleaning products to improve safety, reduce costs, and offer new levels of blast cleaning standards. More...
	20/08/2015 Breaking The Sound Barrier and Keeping It Cool! B&B Coatings, the Huddersfield-based engineering coatings specialists, have installed a new manufacturing process that enables a coating of molten metal to be applied at up to MACH 3 (three times the speed of sound) speeds. More...
	18/08/2015 Re-Engineering The Iconic E-Type Sussex based Eagle E-Types has dedicated the last 30 years to dismantling and restoring original E-Types, assessing every single part and undertaking all of the work necessary to attain the standards expected for it to become an Eagle E-Type. More...
	18/08/2015 45 Years and Still Going Strong Vacuum pump and compressor manufacturer, Gardner Denver has celebrated 45 years of great British manufacturing at its Redditch factory, with an open week for current and former employees, customers and local dignitaries. More...
	14/08/2015 Portable Vibration Calibration PCB Piezotronics, a world leader in vibration, acoustic, pressure, force and torque sensors has announced The Modal Shop’s (TMS) new 9110D Portable Vibration Calibrator offering laboratory grade accuracy and documentation More...
	11/08/2015 Lift Safe Solves Heavy Battery Lifting Problem Lift Safe, materials handling equipment and mobile work lifters specialist, has lightened the load of Adept Power Solutions (APS) by supplying it with a bespoke lifter to move large industrial batteries. More...
	23/07/2015 A Modernisation Programme Exemplifying the results that can be achieved through a crane modernisation programme is Konecranes’ extensive refurbishment of the river Tyne's most historic Hammerhead heavy lifting crane, which worked on such exceptional maritime vessels as Ark Royal and HMS Illustrious in the golden era of the North East shipyards. More...
	23/07/2015 New Service Centre Rotork UK has announced the opening of a new Service Centre in Glasgow to provide enhanced, faster and more economical support for its flow control products in Scotland. More...
	23/07/2015 A UK First Interroll will present for the first time in the UK at the PPMA 2015 show its new modular conveyor platform, which will help its customers, system integrators and OEM’s to quickly plan and easily assemble modern material flow systems. More...
	21/07/2015 Corrosion Monitoring Contract for Forth Replacement Crossing Intertek, a leading quality solutions provider to industries worldwide, has won a contract to provide corrosion monitoring equipment and software for the Queensferry Bridge, formerly known as the Forth Replacement Crossing. More...
	20/07/2015 GHS VSD+ Vacuum Pump Range Atlas Copco has introduced a new range of highly efficient vacuum pumps for the UK manufacturing industry. Representing a quantum leap forward in rough vacuum, the new GHS 350-900 VSD+ range promises customer benefits including average energy savings of 50 per cent More...
	20/07/2015 Bauer delivers IE4 savings for hazardous chemical process Improving the energy efficiency ratings of electric motors is a worldwide goal, but exemptions in the regulations mean that for applications in potentially explosive atmospheres there is no obligation to implement the latest technology. More...
	20/07/2015 Extending The Life of Large Motors & Generators When addressing the operating costs of a modern heavy industrial production facility, most industrial processes will involve electric motors and all will need the services of a generator, either directly on site or indirectly through the electricity supplier. More...
	17/07/2015 High Pressure Pumps - Safeguarding Your Investment With any capital investment, it is important to ensure that new equipment provides continued, reliable operation on a day-to-day basis as well as achieving the shortest return on investment (ROI). For those applications operating high pressure pumps, condition monitoring of the pump and energy efficient operation are key aspects to any design. More...
	13/07/2015 Dutch Team’s Electric Car Wins Formula Student Formula Student Team Delft stormed to victory at the world’s largest student motorsport event run by the Institution of Mechanical Engineers More...
	09/07/2015 Sipsmith Specifies Steam for Traditional Still System Established in Hammersmith in 2009, Sipsmith Distillery is a small, independent business that, using the first copper still to launch in London for almost 200 years, crafts truly artisanal gins and vodkas of uncompromising quality. More...
	02/07/2015 New Appointment Leading hydraulic engineering company, Group HES, recently announced the appointment of Simon Dickinson as its new group regional manager, responsible for business development in the north of the UK More...

About Us
Contact Us
Sitemap
Cookies

Conference Communication, Monks Hill, Tilford, Farnham, Surrey GU10 2AJ, England. + 44 (0) 1252 783111
All Conference Communication’s activities are focussed to encourage the pursuit of excellence in Asset Management, Engineering, Maintenance & Manufacturing by publishing the bi-monthly Maintenance & Engineering Magazine and Maintenance & Asset Management Journal, monthly maintenanceonline ezine, organising conferences, seminars and exhibitions and publishing technical books and papers.