Hi, our plant one unit not running for 3 years now we are in a plan to start the same, now we have to check the motor vibration readings for how many hours we have to keep the motor in on condition to take the readings.

Great article - I especially appreciate the clearly-written definitions of HF and HFE.

Note that the frequent gear failure is not a common problem. If this is happening then you need to carry out ,more in-situ tests to find out the root cause.

Sorry, Aerzen do not have any videos which could help you.

I will contact Aerzen and ask if they have such a video.

can you please post a video for replacing shafting bearing of aerzen compact blower generation 5?

Hi!Thank you for this article. I couldn't find something appropriate till I found it. Could you tell me what is the best measurable system do you know? Have you ever heard about abb <a href="http://hardware.eu/abb" rel="nofollow noopener">http://hardware.eu/abb</a>, I found it - but it had been my first acquaintance with it. And I know nothing about it - just that it has very attractive price.

Centrifugal Pumps cannot 'SUCK'. For effective pumping one has to make water or whatever, available at the suction flange with enough energy to exceed the vp of the liquid. This is why NPSHA is important.
Again, there is the multistage centrifugal pump which taKES care of high head requirement. A rough thumb rule is one impeller can give 50 MLC. I have had pumps installed under my supervision TDH=850 MWC or 8.5 Kg/cm2
What is a VSD? (Variable speed device)? These are referred to as VFD's (F being frequency)

how can i make maintenance for gearbox mixer

I would like to ask about How can I make manitenance for gearbox

Great info..

When I needed to replace my boiler, I chose to to get some prices in from some local firms. After that I whittled it down to the best price, which came from STL Heating.They came out the next day and installed my new boiler - left no mess and even ran me through how it works - well happy (esp. with the cost).

Great video here which explains the features and benefits of photo etching<a href="http://www.precisionmicro.com/6/photo-etching/" rel="nofollow noopener">http://www.precisionmicro.c...</a>

Following interest in the Asset Management Article entitled Process Plant Performance Assurance - Is Achieved By Asset Management Not Just Maintenance, NEPIC are putting on an Asset Management event at Ramside Hall, Durham on 4th December 2014. Practical solutions to asset management problems will be discussed and the HSE will talk about how learnings from oil and gas sector will be transferred into other process sectors. see <a href="http://www.nepic.co.uk/events/30/9/2014Process" rel="nofollow noopener">http://www.nepic.co.uk/even...</a> Plant Performance Assurance - Is Achieved By Asset Management Not Just Maintenance

i have ga-45 model.atlas copco. last month in my company thise m/c three time main moter is bourning .main scru element free move . and all so chek moter overload relay chenge. but all so moter was short. please give me help. ishwar chauhan

If anyone would like further information on Severn Partnership, please go to <a href="http://www.severnpartnership.com" rel="nofollow noopener">www.severnpartnership.com</a> or <a href="http://www.seeable.co.uk" rel="nofollow noopener">www.seeable.co.uk</a> to explore a new way to visualise your data

Smart meters will help monitor this situation, right?
I actually created a process to monitor voltage with our Sensus meters. We discovered that we had long lines with harmonic problems. We thought we had voltage regulation problems. When we checked all our regulation and it was OK; we discovered that we had a system harmonic problem. This harmonic distortion was coming from gas wells.

Yep, its the Toyota way (TPS/Lean)

See also Philip Slater's article "Six Tips to improve spare parts management" on this site.
<a href="http://maintenanceonline.co.uk/article.asp?id=5812&amp;typ=all" rel="nofollow noopener">http://maintenanceonline.co...</a>

ISO 55000 Asset Management - Overview, principles and terminology (launched January 2014). View details at
<a href="https://www.iso.org/obp/ui/#iso:std:iso:55000:ed-1:v1:en" rel="nofollow noopener">https://www.iso.org/obp/ui/...</a>

Book: Asset Management focusing on developing maintenance strategies and improving performance.
Even though this was only published in the Summer of 2013, it was the most ordered book on our website in 2013.

Six Tips To Improve Spare Parts Management was the editorial with the most viewings on <a href="http://www.maintenanceonline.co.uk" rel="nofollow noopener">www.maintenanceonline.co.uk</a> in 2013.

I completely agree on the necessity to gather reliable and consistent data to establish a real and effective maintenance management system. The unavailability of reliable data and the consequent inability to benefit of the advantages coming from their use, shows a critical cultural area that represent a challange for those who know the competitive advantage of the maintenance.

Key Performance Indicators enable, among to many different management functions, to challange equipment operators that are responsible of the line/machine. The regular analysis of KPI shows the trend of the line, enable comparison and contrast with historical figures to challange, as result, equipment operators to discover potential areas of improvement.

This Hiab crane is mounted on the Mercedes-Benz tractor unit not on the trailer and we do not know what make or type of trailer is being used. However, Paul O'Brien, transport co-ordinator at the RNLI's headquarters in Poole, Dorset, will be able to help. (Information supplied by the company who submitted the original RNIB story for our website).